ProGuard® City
Safe city
The patented and design-protected ProGuard City is the alternative for barriers where flexibility and quick relocations are important. ProGuard City is also compatible with parts from the GC series. The barrier is tested according to EN1317-2 in capacity class T2, which is the minimum requirement on roads operated by the Swedish Transport Administration and in most municipalities.
Light and flexible
Weighing 416 kg and allowing angles over 90°, City stands out for flexibility and handling combined with safety. The barrier stands on rubber feet for maximum friction and can be handled with forks, slings or a lifting yoke.
Compatible with ProGuard GC
The ProGuard City barrier’s link is designed to create a smooth transition between City barriers and GC rails where safety requirements change along a stretch. This enables a continuous closure without hazardous gaps. Where higher protection is needed, GC rails can be mounted on top.
Tough outside and in
A steel shell filled with concrete increases durability and capacity. The mesh at the top provides good visibility at corners.
Unique connecting beam
On straight runs where extra stability is required, the built-in connecting beam can be slid by hand between two barriers to create a fixed connection that stiffens the installation. A “click” function ensures the beam is seated correctly every time.
City Barrier
Art. No 10049
Steel-clad barrier with concrete core. Can be angled over 90° and linked with GC rails. On straights, the built-in connecting beam stiffens the installation.
Length: 2,6 m
Width: 0,4 m
Height: 1,13 m
Weight: 416 kg
| SS-EN 1317 | T2 |
|---|---|
|
Working width |
W6 (1,95 m) |
|
Min. Length |
36,5m (14 units) |
City Barrier 1.2 m
Art. No 10183
Short version for restricted spaces.
Length: 1,2 m
Width: 0,4 m
Height: 1,13 m
Weight: 196 kg
ProGuard® City
Accessories
City Angle Beam
Art. No 10078
For increased stability at angled corners. Installs quickly on the upper rail.
Length: 600–925 mm
Width: 60 mm
Height: 85 mm
Weight: 5,6 kg
City GC Attachment
Art. No 10120
Sits in the vertical profiles of the City barrier to create a rigid mount for GC rails on top.
Length: 5,0 cm
Width: 2,3 cm
Height: 20 cm
Weight: 0,5 kg
City X3 Attachment
Art. No 10125
Allows X3 panels to be mounted to the side; height-adjustable and placeable on either side.
Length: 11 cm
Width: 6 cm
Height: 4 cm
Weight: 0,4 kg
City Heightening Bar
Art. No 10425
A 1.4 m high barrier that meets Class 3 of SS-7750-1 and is suitable for separations between worksites and pedestrian or cycle traffic. When needed, the beam can be folded down so the barrier returns to a lower height, simplifying storage and transport.
Length: 2.6 m
Width: 60 cm
Height: 0.5 m
Weight: 18 kg
City Lifting Hook
Art. No 10200
For safe, efficient handling of City barriers. Ergonomic rear handle for alignment. CE-marked to SS-EN 13155.
Length: 38 cm
Width: 18 cm
Height: 36 cm
Weight: 8 kg
Max. lift: 500 kg
