ProGuard® CB
Safety in all traffic environments
The ProGuard CB series is the range for barriers for seclusion in heavy traffic and high speeds. A range of safety barriers and accessories creating a variety of solutions for your specific project. Tested to EN 1317-2.
ProGuard CB for smart, quick and safe installation
The registered-design geometry allows the barriers to face either direction and be lifted straight up to create openings that improve emergency access to the work area or to make a temporary gap in the closure. The self-guiding connection reduces the risk of injury during set-up. The barriers cope with uneven ground and can be set to a radius down to 61.5 m.
Multiple lifting options
CB barriers can be handled in several ways. Centred fork pockets provide safe handling without risk of tipping and can also be used with slings. Three lifting points accommodate a scissor clamp for easy handling and alignment. With chains, lifting eyes can be fitted in the sockets on the top of the barrier.
Safe working width
Rubber-clad feet maximise friction with the ground, improving safety within the work zone.
Longer service life
Metal end plates increase the product’s service life and provide a strong, durable contact surface between barriers.
Flexible accessory mounting
Cast-in sockets on the top of the barrier enable flexible mounting of accessories and signs—making the work environment smoother and safer
Your brand on the road
There are two dedicated branding areas on both sides of the CB barriers to make your company visible in traffic.
Products
ProGuard®CB Accessories
Robust adapter with self-guiding connection, installed between two CB barriers to create angles up to 90°. Length: 50 cm Width: 35 cm Height: 75...
Fits in the cast-in sockets on top of CB barriers. The X3 panel can be height-adjusted, rotated and placed on either side for improved...
For mounting signs on top of CB barriers; rotatable to face oncoming traffic. Length: 33 cm Width: 10 cm Height 15.5 cm Weight: 2.3...
Mounts in the top sockets and is rotatable to set the X3 panel’s angle towards traffic on curves. Length: 10 cm Width: 10 cm...
Art. No 10115 Rigid-mount bracket for installing GC rails on ProGuard CB barriers. Length: 33 cm Width: 10 cm Height: 12.5 cm Weight 2.4...
Specifically designed to fit the ProGuard® CB barrier. works with GP-link, SafePass. RoadBloc etc. The GPL240 is a safe and efficient tool for lifting...
FAQ
Can CB806 and CB803 barrier elements be used together?
Yes, they can. There are documented values for both working width and W-classification when barrier installations use a combination of different element lengths.
What containment classes has the barrier been tested to?
CB806 is classified as follows:
T2 / W1
T3 / W3
N2 / W5
CB803 is classified as follows:
T2 / W2
T3 / W4
What is the minimum installation length required?
CB806 requires the following minimum installation lengths:
T2 / W1: 23.2 m (4 elements)
T3 / W3: 29.0 m (5 elements)
N2 / W5: 52.2 m (9 elements)
What is the working width (W-class) / working width of the barrier?
W1 / 0.6 m in T2
W3 / 1.0 m in T3
W5 / 1.5 m in N2
(Working width is the maximum lateral movement of the barrier during an impact, measured from the traffic-facing side of the barrier.)
What do the CB barriers weigh?
CB803: 980 kg
CB806: 2,000 kg (2.0 tonnes)