ProGuard® NRP
Shell protection for CB
NRP is a noise protection system for ProGuard CB that creates an attractive and durable enclosure of the workplace.
Noise-reducing panels:
Insulated sandwich panels form a robust wall around the site and enable time-efficient set-up.
Intrusion-resistant:
A standard installation with two panels gives a 2.0 m high enclosure; adding the Top-Up mesh raises it to 2.6 m and offers very high intrusion resistance.
Privacy-screened:
The system is fully opaque, preventing unauthorised viewing of the site.
Quick installation:
Two people can install the system using hand tools only; all parts weigh under 15 kg.
NRP Panel
Art. No 10310
Length: 2835 mm
Width: 42 mm
Height: 630 mm
Weight: 10 kg
NRP Post MkII
Art. No 10330
Length: 350 mm
Width: 113 mm
Height: 1150 mm
Weight 11 kg
NRP Gap Cover
Art. No 10300
Length: 200 mm
Width: 200 mm
Height: 1300 mm
Weight: 5,2 kg
ProGuard® NRP Accessories
NRP Top-Up MkII
Art. No 10345
A galvanised steel mesh with upward-facing wire ends creates an intrusion-resistant site enclosure.
Length: 2,900 mm
Height: 700 mm
Weight: 8 kg
NRP Top-Up Corner
Art. No 10270
The Top-Up corner is continuously adjustable to accommodate any angle required.
20Length: 726 mm
Width: 10 mm
Height: 606 mm
Weight: 4 kg
NRP Top-Up Post
Art. No 10350
Mounted in the uprights to hold the Top-Up mesh in place.
Length: 65 mm
Width: 100 mm
Height: 840 mm
Weight: 1.5 kg
NRP Top-Up Fastener MkII
Art. No 10346
Used to secure the Top-Up mesh to the panels.
Length: 100 mm
Width: 65 mm
Height: 60 mm
Weight: 0.3 kg
Fork Lift Cover
Art. No 10280
Creates a fully screened-off installation and minimises climbability for unauthorised access.
Length: 410 mm
Width: 140 mm
Height: 110 mm
Weight: 1.7 kg
Fork Lift Cover Lite
Art. No 10375
Lightweight version of the fork-pocket cover, easily mounted without tools, providing a screened-off site enclosure.
Length: 410 mm
Width: 140 mm
Height: 110 mm
Weight: 1.0 kg
NRP Corner
Art. No 10285
For sharp corners, a panel made from reinforced rubber that is flexible and easy to handle.
Length: 1,200 mm
Width: 760 mm
Height: 60 mm
Weight: 12 kg
NRP Steel Corner
Art. No 10415
Hörn som passar både till NRP och NRP Lite. Gjord i galvanserad plåt som böjs efter vinkeln och monteras med montageskruvar i skivmaterialet.
Length: 1,200 mm
Width: 760 mm
Height: 2 mm
Weight: 12 kg
